Clothing

  　 　 　 　 CLICK HERE TO BUY .        The tunic was cut in two front panels, two back panels, sleeves of two panels each, and the collar. Front and back panels were connected by lateral seams from the armpit down, shoulder seams, and a center back seam. The bottom edge was turned inside 3cm wide from the edges. The weight was about 1,440 grams.     The upper corners of the two front panels were at an approximate right angle. The front edges reached a the upper portion about 5cm over the vertical center line, and were slightly slanted outwards from the breast downwards. To accentuate the rounded breast, the breast portion of both front panels were slightly padded by wadding fabric. Two tucks on either front panel allowed for a close fit – one in the waistline approximately between the breast and the side pocket. And one from the armpit down to the hip and forward of the lateral connecting seam. The lampels were reinforced internally by wadding or si...

  　 　 　 　 CLICK HERE TO BUY .   Camouflage Smock: A camouflage coat with large fall-down collar, two concealed hip pockets with buttoned straight-edge flap, and buttoned cuffs was largely worn by the Luftwaffe Field Division units. It had a five buttons front closure to the neck, but was usually worn with the top button open. Under each arm pit was a slit to allow for air circulation. A Luftwaffe national emblem, usually with the camouflage backing, was sewn to the right breast. Shoulder straps or boards were usually worn, denoting the rank of the wearer. …  

  Item news update: 2021. Sep. 13 - Kriegsmarine EM navy blue wool PEA tunic jacket 　 　 　 　 CLICK HERE TO BUY .   The jacket was made of navy blue cloth, and constructed of two front panels with lapels and a back panel, which were connected by shoulder and lateral seams. The length reached 5 – 10 cm bellow the crotch. Since 1939 the back had two panels with a center seam, and the length was shortened 5cm. it appears that style dictated short jackets as period photos often show the jacket rarely covering the trouser pockets. Five buttonholes were distanced 2cm from the front edge with the uppermost in line with the base of the lapels, and the lowest one 18 – 26cm (depending on the wearer’s size) above the lower rim. A vertical row of five gold anchor buttons was positioned 18cm from either front edge, and in line with the buttonholes. Buttons were size I with long shanks on the right front panel, and with short shanks on the left. A buttonhole was positioned parallel ...

 The  military beret  was first used by the French Army - Chasseurs Alpins in 1889. British General Hugh Elles used the beret for the Royal Tank Regiment after seeing it during World War I. Soldiers need to crawl in and out of tank, and berets can be used to protect their hair.In 1924, tankers introduced a black wool beret with an adjustable ribbon that could be looped around the back and tied. Subsequently, in the 19th century, berets were mass-produced in Spain and England, and later became part of the uniforms of many military and police units around the world. Military berets are made of wool or acrylic, with a headband or sweatband attached to the wool, made of leather, silk or cotton, sometimes with a drawstring that allows the wearer to tighten the hat. Berets are usually without lining, but linings can be added on demand.Berets can also be made in a variety of colors, and different badges are pasted on the beret to distinguish different troops. Chin...

  Not all boots can be called   tactical boots .  Let's take a look at the characteristics of tactical boots from   China Xinxing Guangzhou Imp&Exp Co., Ltd . Breathability    Soldiers need to wear tactical boots for a long time for actual combat and training. The tactical boots produced by our company are made of materials with good air permeability. If you have requirements, you can also choose mesh materials to increase air permeability. Lightweight and flexible    Because soldiers or policemen need to wear tactical boots for activities, lightweight and flexible boots allow them to walk quickly, and tactical boots will not become a burden for their actions. Robustness    Militray Army combat tactical boots need to deal with various environments, such as deserts and mountains. When soldiers or policemen wear tactical boots for combat training, strong collisions may occur. Therefore, when our company specifically...

  Military uniforms , like other clothing, often use theses two materials, like cotton and polyester. These two fabrics are often used to make  military camouflage T-shirts ,  Military uniforms, Police uniforms,etc. The basic difference between cotton and polyester is that cotton fabric is derived from cotton plants, while polyester is considered to be man-made fiber extracted from petroleum products. For the same reason, it is not considered as a sustainable fabric. In terms of breathability, cotton is a more breathable fabric, which can absorb all the body's moisture (sweat). On the other hand, polyester is a synthetic fabric, so its breathability is worse than cotton, and it does not absorb too much water or moisture. But polyester is not without its benefits. Polyester with strong and wear-resistant, so it will be added to  military army combat uniforms , police tactical uniform . CHINA XINXING GUANGZHOU IMP&EXP CO., LTD  is specializing in the...

 You must pay attention, when you consult  Military T-shirts ,  Army shirts  or  Military uniforms  and other clothing, we will ask you what kind of fabric you need. Now, let’s ( China Xinxing Guangzhou Import and Export Co,Ltd )  introduce the different fabric for you. The warp and weft can be woven in different types of the three basic weaves; plain, twill, rip-stop. Plain fabric Plain fabric can be called (tabby weave, linen weave or taffeta weave), is the most basic of textile weaves. A plain weave can be identified by its checkerboard-like appearance. This fabric has the characteristics of being strong and wear-resistant. Twill fabric We can know what this fabric looks like based on the name of the twill. Twill is a textile weave with a pattern of diagonal parallel ribs. Twill cloth is more resistant to stains than plain cloth. For example, denim is twill weave. Ripstop Fabric Ripstop fabric Using special technology, with anti-tear characteri...